The Starboard UCS Glider MK2 and MK3 front wings are ideal for freeride wingfoiling, pumpfoiling, or downwind foiling. The UCS Glider front wings are available in various sizes. The Glider MK3 wings have been upgraded with improved stall speed and more dynamic foil characteristics. The 2 largest sizes remain unchanged for 2026

This high aspect front wing series is has a very good glide and is very efficient. These wings give relatively much lift. These Glider wings only fit the new UCS system.

Available Starboard UCS Glider MK2 / MK3 front wings

• Glider 2 front wing 750 – high wind freeride / freestyle wingfoiling / windfoiling
• Glider 3 front wing 750 – high wind freeride / freestyle wingfoiling / windfoiling
• Glider 2 front wing 900 – medium wind freeride wingfoiling / windfoiling
• Glider 3 front wing 900 – medium wind freeride wingfoiling / windfoiling
• Glider 3 front wing 1050 – medium wind freeride wingfoiling / windfoiling
• Glider 3 front wing 1250 – light wind slalom wingfoiling
• Glider 2 front wing 1700 – for low wind / wing foiling / pump foiling / down wind foiling
• Glider 2 front wing 2000 – for low wind / wing foiling / pump foiling / down wind foiling

Glider series wingspan and aspect ratio

• Glider 2 front wing 750 – Wingspan 74 cm | AR 7.3
• Glider 3 front wing 750 – Wingspan 84 cm | AR 9.4
• Glider 2 front wing 900 – Wingspan 84 cm | AR 7.8
• Glider 3 front wing 750 – Wingspan 84 cm | AR 9.4
• Glider 3 front wing 1050 – Wingspan 100 cm | AR 9.5
• Glider 3 front wing 1250 – Wingspan 108 cm | AR 9.3
• Glider 2 front wing 1700 – Wingspan 120 cm | AR 8.5
• Glider 2 front wing 2000 – Wingspan 140 cm | AR 9.8

UCS construction is stiffer

The major advantage of UCS construction is that the connection to the mast is much stiffer. This provides better stability and control while wing foiling or wind foiling.

The connection of the wings to the fuselage is also stiffer. In addition, the new construction greatly improved hydrodynamics. This makes the glide and end speed of the foils much better.

Degree suitability for wing foiling/wind foiling

• For wing foiling: very suitable
• For windfoils: suitable from 1100 and smaller
• Learn more about the Starboard UCS wing series here.

What do you need to put together a complete UCS Glider foil?

To assemble a complete Starboard UCS foil (wingfoil or windfoil) you need the following parts;

• UCS carbon mast (available in topplate or deep tuttle versions)
• UCS fuselage
• UCS Glider 2 front wing
• UCS PRO back wing
• UCS bolt set
• Optional wing angle spacer set or fuselage spacers
• Starboard Foil bag

Read all about the new UCS system in our blog article.